i30 Builders · Frisco, TX
Pergolas and Patio Covers in Frisco
We build patio covers and pergolas in Frisco and pull the permit. This is what the city asks of each kind.
Permits handled · Written scope and price before any deposit
Free site visit · written scope · lump-sum price
Rated 5.0 on Google$1M GL + $1M Umbrella1-year workmanship warranty
Get a written estimate
Four fields. We call back within one business day to set up the site visit.
- GL + umbrella coverage
- $1M + $1M
- Workmanship warranty
- 1-yr
- Cities served
- 33
What does Frisco require to install a pergola?
A building permit before it goes up, on a survey showing the distance to every property line, with framing drawings and a footing detail. An aluminum, steel or vinyl pergola has to be engineered. No accessory structure may stand in an easement, and past 120 square feet the zoning code has a say in the materials.
The Frisco permit, line by line
- Frisco requires a building permit for every accessory structure before it is placed or built, and its own list names patio covers, arbors and gazebos. City of Frisco Building Inspections FAQ, Do I need a permit for a shed or other accessory building?
- A pergola or patio cover permit costs $75 to start, then 59 cents a square foot of gross area, capped at $550. Begin work before the permit issues and the fee doubles. City of Frisco Permit, Inspection and Miscellaneous Consolidated Fee Schedule, effective 10/1/2026, pp. 3 and 4
- The survey has to mark where the pergola goes and how far it sits from every property line. Add framing drawings or the maker's brochure with dimensions, and a footer detail sheet showing how the posts are fastened. If the holes go below grade, the plans say how deep, and whether there is concrete and rebar. City of Frisco Residential Alteration Submittal Requirements, Form 4038, February 2026, Arbors, patio covers, gazebos, carports, sunrooms
- If the pergola attaches to the house, the plans name what it fastens to: the brick, the main supports of the house, or something else. City of Frisco Residential Alteration Submittal Requirements, Form 4038, February 2026
- Contractors have to hold a valid Frisco registration before a permit can be issued to them. City of Frisco Building Inspections FAQ, How do I register as a contractor to work in Frisco?
- Frisco has built to the 2024 International Residential Code, with local amendments, since March 1, 2026. City of Frisco, Adopted Codes
- An inspection requested online before 7 a.m. is done that day. Homeowner requests by email have to arrive by 4 p.m. to get the next business day. City of Frisco, Inspections
Read from the city’s own documents on the dates linked. Codes and fees change and city staff interpret them, so we confirm for your address before we pull the permit.
Aluminum or cedar, in Frisco's terms
- The submittal checklist puts it in one line: a structure made of aluminum, steel or vinyl must be engineered. For a wood pergola, the same checklist asks for framing drawings and the footer detail. City of Frisco Residential Alteration Submittal Requirements, Form 4038, February 2026
- The zoning code wants an accessory structure built in the same exterior material as the house. Metal or wood is allowed outright on one of 120 square feet or less in a single-family district. City of Frisco Zoning Ordinance, Chapter 63, Section 4.06 Accessory Structure Standards, 4.06.05(A) and (B)(4)
- Fiber cement siding can stand in for masonry on an accessory structure of up to 200 square feet in a single-family district. Past those sizes, we get Building Inspections' reading on an open pergola in writing before we draw. City of Frisco Zoning Ordinance, Chapter 63, Section 4.06 Accessory Structure Standards, 4.06.05(B)(2)
- The zoning figure carries a note for patio covers and arbors attached to the house: open on all sides, a permeable roof that does not keep weather out, and no taller than one story. City of Frisco Zoning Ordinance, Chapter 63, Section 4.06 Accessory Structure Standards, Figure 4.06.04.1
Read from the city’s own documents on the dates linked. Codes and fees change and city staff interpret them, so we confirm for your address before we pull the permit.
Where it can stand on a Frisco lot
- No accessory structure may stand in any easement, whatever the setback alone would allow. City of Frisco Zoning Ordinance, Chapter 63, Section 4.06 Accessory Structure Standards, 4.06.04(B)
- On a lot that backs to an alley, a structure no taller than 8 feet may sit 3 feet off the rear line, if a solid fence or wall of the same height runs along that line to screen it. City of Frisco Zoning Ordinance, Chapter 63, Section 4.06 Accessory Structure Standards, Figure 4.06.04.1
- A structure in the back of the lot built within 10 feet of the house takes the house's rear setback instead of its own. City of Frisco Zoning Ordinance, Chapter 63, Section 4.06 Accessory Structure Standards, Figure 4.06.04.1, note 4
- A fire pit stays 15 feet from the house and 10 feet from anything combustible, so it belongs well away from a wood pergola. City of Frisco Residential Alteration Submittal Requirements, Form 4038, February 2026, Fire pits
- An outdoor kitchen sink or ice chest has to drain to the sanitary sewer, and the plans state whether the grill runs on natural gas or propane. City of Frisco Residential Alteration Submittal Requirements, Form 4038, February 2026, Outdoor kitchens and grills
Read from the city’s own documents on the dates linked. Codes and fees change and city staff interpret them, so we confirm for your address before we pull the permit.
Frisco Questions
What people in Frisco ask us
Aluminum or cedar: which pergola should I put up in Frisco?
Aluminum will not rot or check and never needs stain, but it usually comes in set sizes and, in Frisco, has to be engineered before it is permitted. Cedar can be cut to fit any yard, carries a solid roof well and takes stain, and it needs re-staining to keep its color. We build in cedar, and we will tell you plainly if aluminum suits your yard better.
Does a pergola kit need a permit in Frisco?
Yes. Every accessory structure needs one, kit or custom. A metal or vinyl kit also needs engineering, and the maker's brochure can serve as the framing drawing.
How near the fence can my Frisco pergola sit?
Never in an easement. On an alley lot, a structure up to 8 feet tall can sit 3 feet off the rear line behind a solid fence of the same height. Everything else follows your lot's zoning, which we confirm with Building Inspections.
Does my HOA need to sign off?
Possibly. Frisco's own checklist tells applicants that some subdivisions require HOA approval and to contact the HOA. We plan that review alongside the city's.
How long does a Frisco pergola take?
Frisco does not publish a review time for patio covers. Once the permit issues, most builds take one to two weeks, and inspections requested online before 7 a.m. are done the same day.
How do you price a pergola in Frisco?
In writing, after we walk the yard and measure. The price does not move unless the scope does.
Keep reading
Get a written estimate in Frisco
Tell us what you want built and roughly how big. We check the city and HOA rules for your address and price the scope in writing.
indicates a required field
Step 1 of 2: Project info