i30 Builders · Murphy, TX
Fence Builder in Murphy
We build fences in Murphy and handle the permit. The city's fence and pool rules shape the layout, and this is how.
Permits handled · Written scope and price before any deposit
Free site visit · written scope · lump-sum price
Rated 5.0 on Google$1M GL + $1M Umbrella1-year workmanship warranty
Get a written estimate
Four fields. We call back within one business day to set up the site visit.
- GL + umbrella coverage
- $1M + $1M
- Workmanship warranty
- 1-yr
- Cities served
- 33
What does a fence company in Murphy have to get right?
The paperwork first: an application and two site plans drawn on a survey, then an inspection before the city accepts the fence. Then the layout: a real gate in anything that encloses an area, a stepped transition where a privacy fence meets a lower one along a street, and around a pool, a 48 inch barrier with gates that swing out and latch themselves.
From application to the card of acceptance
- Murphy's fence permit starts with the application and two site plans on a survey plat. The plans place the fence against the property lines, the house, any pool and any easement. City of Murphy Fence Permit Requirements
- Every contractor and subcontractor on a Murphy permit has to be registered with the city, and signing the application gives the city permission to come onto the property for inspections. City of Murphy Building Permit Application, updated 01/2017
- When the fence is finished, the permit office has to be told. The building official inspects it, then either issues a card of acceptance or rejects it. City of Murphy Fence Permit Requirements
- A fence put up before May 27, 2004 that does not meet today's rules may stay. Once it is replaced, destroyed, or damaged to 60 percent or more of its value, that protection is gone and the new fence is built to the current code. City of Murphy Fence Permit Requirements
- Disagree with how the rules were applied? Appeals go to the planning and zoning commission. A request based on hardship goes to the zoning board of adjustment as a special exception. City of Murphy Fence Permit Requirements
Read from the city’s own documents on the dates linked. Codes and fees change and city staff interpret them, so we confirm for your address before we pull the permit.
Gates, street sides and special runs
- Any fence that encloses an area needs a gate or opening at least 3 feet wide with 6 feet 8 inches of headroom. A side yard closed off with no way through does not meet it. City of Murphy Fence Permit Requirements
- Where a privacy fence runs into a lower fence or wall along a street, Murphy wants a stepped transition between the two heights rather than a hard drop. City of Murphy Fence Permit Requirements
- For sight lines at street corners, the fence rules hand off to Section 30.07.108(a). On a corner lot we read that section before we set the corner posts. City of Murphy Fence Permit Requirements
- A dog run or tennis court enclosure behind the building line may be smooth, non-climbable 2 by 4 inch mesh on metal posts. Any other special-purpose material needs the building official's approval. City of Murphy Fence Permit Requirements
Read from the city’s own documents on the dates linked. Codes and fees change and city staff interpret them, so we confirm for your address before we pull the permit.
When the fence guards a pool
Murphy's December 2024 pool guide sets the barrier rules, and a pool fence is permitted on its own.
- A new or rebuilt fence around a pool needs its own fence permit, separate from the pool permit. City of Murphy Swimming Pool, Spa and Hot Tub Guidelines and Permit Requirements, December 2024
- The barrier is at least 48 inches tall measured outside, sits no more than 2 inches above grade, and has no gap a 4 inch ball can pass. If its horizontal rails are under 45 inches apart, they go on the pool side and the pickets sit no more than 1.75 inches apart. City of Murphy Swimming Pool, Spa and Hot Tub Guidelines and Permit Requirements, December 2024
- Walk-through gates swing out, away from the water, and close and latch on their own. A release lower than 54 inches goes on the pool side, at least 3 inches below the top, with no opening over half an inch within 18 inches of it. City of Murphy Swimming Pool, Spa and Hot Tub Guidelines and Permit Requirements, December 2024
- Where the house wall forms part of the barrier, the pool needs a powered safety cover, or the doors into the pool area need an alarm that sounds within 7 seconds and runs at least 30. City of Murphy Swimming Pool, Spa and Hot Tub Guidelines and Permit Requirements, December 2024
- The fence has to be standing for the pre-plaster or final inspection. Requests that reach the city by 3 p.m. are scheduled for the next business day. City of Murphy Swimming Pool, Spa and Hot Tub Guidelines and Permit Requirements, December 2024
- No part of the pool, its equipment or its deck may sit in an easement. The pool stays 5 feet from the property line, and the equipment and decking stay 3 feet back. City of Murphy Swimming Pool, Spa and Hot Tub Guidelines and Permit Requirements, December 2024
Read from the city’s own documents on the dates linked. Codes and fees change and city staff interpret them, so we confirm for your address before we pull the permit.
Murphy Questions
What people in Murphy ask us
Do I need a permit to replace an old fence in Murphy?
Yes. A new fence is always permitted, and replacing a stretch of 15 linear feet or more counts as a repair that needs one. If your fence went up before May 2004, the replacement is built to today's code.
How wide does my gate have to be?
At least 3 feet, with 6 feet 8 inches of clear headroom, on any fence that encloses an area.
Who signs off on a finished fence in Murphy?
The building official. You or your builder tell the permit office the fence is done, it gets inspected, and a passing fence gets a card of acceptance.
What does a pool fence in Murphy need?
Its own fence permit, 48 inches of height outside, gaps a 4 inch ball cannot pass, and gates that swing away from the pool and close and latch themselves. It has to be up before the pre-plaster inspection.
How long does a new fence take in Murphy?
Most runs take 1 to 3 days on site once the permit and materials are in. Then the city's inspection, which you request once the fence is complete.
How do you price a fence in Murphy?
In writing, after we walk the line, check the easements and count the gates. The price holds unless the scope changes.
Keep reading
Get a written estimate in Murphy
Tell us what you want built and roughly how big. We check the city and HOA rules for your address and price the scope in writing.
indicates a required field
Step 1 of 2: Project info