Most fence projects in Caddo Mills run $20 to $58 per linear foot installed, with the wide range reflecting lot size and fence type. A standard cedar privacy fence around the house runs $32 to $46 per foot, while pipe and wire ranch lines on acreage run far less per foot but cover much longer runs. Caddo Mills is a rural-leaning Hunt County town where i30 has deep roots, so the total often comes down to how much perimeter you are fencing, not just the style.
Caddo Mills Fence Cost by Material
| Fence Type | Cost per Linear Foot (installed) | Typical Run | Use |
|---|---|---|---|
| Cedar privacy (6 ft) | $32–$46 | $4,800–$6,900 / 150 LF | Backyard privacy |
| Board-on-board cedar | $42–$58 | $6,300–$8,700 / 150 LF | No-gap privacy |
| Pipe & wire ranch | $15–$30 | $4,500–$9,000 / 300 LF | Acreage perimeter, livestock |
| No-climb horse fence | $24–$42 | $7,200–$12,600 / 300 LF | Equestrian and pasture |
Privacy, Ranch, and Acreage Fencing
Caddo Mills properties run from in-town homes that want standard cedar privacy to multi-acre lots that need a pasture perimeter. We build both, and often both on the same property: cedar privacy around the house and patio for screening, with a pipe, welded-wire, or no-climb line running the acreage for livestock or a perimeter. Matching the fence to how each part of the property is actually used is what keeps the budget sensible on a larger Hunt County lot.
City of Caddo Mills and Hunt County Permitting
Whether a permit is required depends on whether your address is inside the City of Caddo Mills or in unincorporated Hunt County, and on the fence type and location. We verify the rules for your specific lot before any post work. Caddo Mills has few of the strict HOA design committees common in Collin County, so for most rural and established-in-town properties the project is straightforward once setbacks and any shared lines are confirmed.
Blackland Clay and Post Setting in Caddo Mills
Caddo Mills sits on expansive Blackland clay, and the posts are what fail first. The clay swells when wet and shrinks in summer, pushing shallow-set posts out of plumb within a few years. We set posts deeper than a typical install, use concrete footings sized for the soil, and on long acreage runs we use driven pipe and braced corners that hold a line tight across distance. On cedar privacy we offer galvanized steel posts behind the pickets on exposed runs so the fence stays straight.
What Adds Cost in Caddo Mills
Free Estimate
Planning this type of project?
Tell us your scope, city, and timeline. We follow up with clear pricing and next steps, no obligation.
- —Board-on-board upgrade over standard cedar privacy: +$9–$14 per linear foot
- —Steel posts behind cedar on exposed runs: +$4–$9 per linear foot
- —Braced corners and gates on long acreage runs: priced per the run
- —Wide drive, equipment, or livestock gates: +$500–$2,500 each
- —Tear-out and haul of an old fence: +$3–$6 per linear foot
Maintenance and Lifespan of a Caddo Mills Fence
Cedar privacy fence grays within a season or two in the full Hunt County sun unless it is sealed, and a coat of stain every two to three years holds the color and protects the boards from the heat and the clay-driven moisture swings. Pipe and wire ranch lines are essentially maintenance-free beyond an occasional check of the braces and gates after the ground moves through its first wet-dry cycle. We leave a short care note with every install so both the privacy fence and any acreage line stay in good shape.
What to Ask a Caddo Mills Fence Contractor
- —Can you combine cedar privacy at the house with a ranch or wire line on the acreage?
- —Is my address inside the City of Caddo Mills or unincorporated Hunt County for permits?
- —What post and footing approach do you use for the Blackland clay and long runs?
- —How do you brace corners and hang gates so a long line stays tight?
- —Is the quote itemized by material, labor, posts, and gates, and what warranty applies?
Get a Free Caddo Mills Fence Estimate
Backyard privacy, a pasture perimeter, or both on the same property, we match the fence to how the lot is used and quote it itemized. Call (469) 721-0146. Response within 1 business day.
Frequently Asked Questions
Common questions about this topic from DFW homeowners and project planners.
How much does a fence cost in Caddo Mills, TX?
Most Caddo Mills fences run $20–$58 per linear foot installed. Cedar privacy around the house runs $32–$46 per foot; pipe and wire ranch lines on acreage cost less per foot but cover much longer runs, so the total depends heavily on the perimeter.
Can you fence acreage and livestock property in Caddo Mills?
Yes. We build pipe, welded-wire, and no-climb horse fencing for Caddo Mills' larger Hunt County lots, with braced corners and gates sized for equipment and livestock, often alongside cedar privacy around the house.
Do I need a permit for a fence in Caddo Mills?
It depends on whether your address is inside the City of Caddo Mills or in unincorporated Hunt County, plus the fence type and location. We verify the rules and any setbacks for your specific lot before installing.
How do you keep a long fence line straight on a Caddo Mills lot?
Posts fail first in Blackland clay, so we set them deeper with concrete footings sized for the soil, use driven pipe and braced corners on long acreage runs, and add steel posts behind cedar pickets on exposed runs.
About the author
Yelp
i30 Builders Editorial Team
AuthorEditorial and Field Operations
Internal content and field documentation team
i30 Builders Field Leadership
Expert ReviewerFounder-Led Field Operations
General contractor, field project management